Proper Use of Professional Amplifiers for Proper Operation

To make a reasonable configuration between Professional Amplifiers and speakers, in general, the output power of the power amplifier should be 1.5-2 times the rated power of the speakers. For example, if the rated power of the speaker is 200w, the output power of the Professional Amplifiers should not be lower than 300-400w. Such a configuration can not only ensure that the sound will not be distorted, but also reduce the possibility of speaker damage.

Here is the content list:

• Proper use of Professional Amplifiers

• Ensure the normal operation of the audio unit

Proper use of Professional Amplifiers

When Professional Amplifiers are in normal working condition, the top of the signal waveform and the bottom of the signal waveform will maintain a very smooth sinusoidal waveform. Its average output power is half of the peak output. When the Professional Amplifiers are overdriven, both the tops of the signal waveform and the bottoms of the signal waveform will be clipped. The signal waveform is close to a square waveshape. At this time, the average power of the amplifier is close to the peak power. It can also be said that although the average power has increased, the output of the amplifier has caused great distortion. When the above situation occurs, Professional Amplifiers will double the rated output power to the tweeter drive unit, and the tweeter can't bear this overload load. At this time, if a power amplifier with a larger output power can be replaced, it can not only meet the required high power without clipping distortion but also ensure that the program signal accepted by the speaker system maintains its normal energy distribution. In this way, the tweeter of the speaker is less likely to be burned out.

Ensure the normal operation of the audio unit

To keep your speakers safe, it should be kept in mind that for signals with very large transients, the required power may be several times the average power. Therefore, when configuring the audio system project, Professional Amplifiers with a rated power larger than the required power are required. If the power amplifier has enough reserve energy, then the signal with a large transient will still sound clear and bright. Otherwise, the sound will be dark and cloudy.

In addition, it is necessary to prevent the sudden impact of large signals when using it. For example, the screeching sound of a deck recorder tape being rewound quickly in both directions, or the sound of a gun coming out of a speaker as it enters a human voice. Or the "brown pop" sound generated by the random plugging and unplugging of the signal line in the working state, and the sound caused by excessively boosting high frequencies on the mixer or the equalizer due to poor sound conditions or poor sound source quality distortion. Blindly pursuing bass, emphasizing the loudness and atmosphere of the scene, and turning the volume potentiometer too high, etc., will damage the tweeter.

Our official website is www.xinhesound.com. If you want to know more about Professional Amplifiers, you can communicate with us on the website. We will be glad to provide you with high-quality Professional Amplifiers, good service, and competitive prices to provide more and better service!